Geckodrive Stepper Motor Controller, 7 A, 80 V dc
Technical Document
Specifications
Brand
GeckodriveCurrent Rating
7 A
Voltage Rating
80 V dc
Overall Length
63.5mm
Overall Width
21mm
Overall Depth
65.5mm
Country of Origin
United States
Product details
G203V - Stepper Drive
The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.
STEP, DIRECTION and DISABLE inputs are opto-isolated
These inputs are +2.5/3.3/5 VDC compatible
Direction is clocked in on the active step pulse edge
Needs heatsinking for current settings greater than 3 amps
LED-status indicators
Power supply voltage between 15 and 80 VDC
Stock information temporarily unavailable.
Please check again later.
BD 143.185
BD 143.185 Each (Exc. Vat)
BD 157.503
BD 157.503 Each (inc. VAT)
1
BD 143.185
BD 143.185 Each (Exc. Vat)
BD 157.503
BD 157.503 Each (inc. VAT)
1
Technical Document
Specifications
Brand
GeckodriveCurrent Rating
7 A
Voltage Rating
80 V dc
Overall Length
63.5mm
Overall Width
21mm
Overall Depth
65.5mm
Country of Origin
United States
Product details
G203V - Stepper Drive
The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.
STEP, DIRECTION and DISABLE inputs are opto-isolated
These inputs are +2.5/3.3/5 VDC compatible
Direction is clocked in on the active step pulse edge
Needs heatsinking for current settings greater than 3 amps
LED-status indicators
Power supply voltage between 15 and 80 VDC