Telemecanique Sensors Pressure Switch, 0bar Min, 10bar Max, Analogue Output
Technical Document
Specifications
Minimum Pressure Reading
0bar
Maximum Pressure Reading
10bar
Accuracy
±0.1 %
Output Type
Analogue
Media Measured
Air, Corrosive Fluid, Fresh Water, Hydraulic Oil, Sea Water
Analogue Output
4 → 20 mA
Electrical Connection
M12 3-Pin Connector
Response Time
2 ms
Maximum Current
20 mA
Supply Voltage
12 V dc, 24 V dc
Housing Material
Aluminium Oxide Ceramic, Stainless Steel
Minimum Operating Temperature
-15°C
Mounting Type
Thread Mount
IP Rating
IP66, IP67
Maximum Operating Temperature
+85°C
Country of Origin
Switzerland
Product details
OsiSense XMLG Electronic Pressure Sensors
Schneider Electric XMLG pressure transmitters and pressure switches feature a ceramic pressure measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics, providing either a digital or analog output signal.
Adjustable differential
1 CO snap acting contact
Temperature range: –15 to +85 °C
Enclosure rating: IP66
Stock information temporarily unavailable.
Please check again later.
BD 146.765
Each (Exc. Vat)
BD 161.441
Each (inc. VAT)
1
BD 146.765
Each (Exc. Vat)
BD 161.441
Each (inc. VAT)
1
Technical Document
Specifications
Minimum Pressure Reading
0bar
Maximum Pressure Reading
10bar
Accuracy
±0.1 %
Output Type
Analogue
Media Measured
Air, Corrosive Fluid, Fresh Water, Hydraulic Oil, Sea Water
Analogue Output
4 → 20 mA
Electrical Connection
M12 3-Pin Connector
Response Time
2 ms
Maximum Current
20 mA
Supply Voltage
12 V dc, 24 V dc
Housing Material
Aluminium Oxide Ceramic, Stainless Steel
Minimum Operating Temperature
-15°C
Mounting Type
Thread Mount
IP Rating
IP66, IP67
Maximum Operating Temperature
+85°C
Country of Origin
Switzerland
Product details
OsiSense XMLG Electronic Pressure Sensors
Schneider Electric XMLG pressure transmitters and pressure switches feature a ceramic pressure measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics, providing either a digital or analog output signal.
Adjustable differential
1 CO snap acting contact
Temperature range: –15 to +85 °C
Enclosure rating: IP66