Acim Jouanin Formable Coil Heater, 1.65m, 1 kW, 230 V ac

RS Stock No.: 374-3160Brand: Acim JouaninManufacturers Part No.: RCF/TC1000
brand-logo
View all in Heating Elements

Technical Document

Specifications

Power Rating

1 kW

Supply Voltage

230 V ac

Length

1.65m

Width

3.7mm

Heating Element Form

Insulated Strip

Country of Origin

France

Product details

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Warning

For reasons of safety the heater block and/or heater sheath must be bonded to earth

Approvals

UL Recognised; CSA Certified

Stock information temporarily unavailable.

BD 179.278

BD 179.278 Each (Exc. Vat)

BD 197.206

BD 197.206 Each (inc. VAT)

Acim Jouanin Formable Coil Heater, 1.65m, 1 kW, 230 V ac

BD 179.278

BD 179.278 Each (Exc. Vat)

BD 197.206

BD 197.206 Each (inc. VAT)

Acim Jouanin Formable Coil Heater, 1.65m, 1 kW, 230 V ac
Stock information temporarily unavailable.

Stock information temporarily unavailable.

Please check again later.

QuantityUnit price
1 - 4BD 179.278
5 - 9BD 172.095
10+BD 168.157

Technical Document

Specifications

Power Rating

1 kW

Supply Voltage

230 V ac

Length

1.65m

Width

3.7mm

Heating Element Form

Insulated Strip

Country of Origin

France

Product details

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Warning

For reasons of safety the heater block and/or heater sheath must be bonded to earth

Approvals

UL Recognised; CSA Certified