Assemtech SPST-NO PCB Reed Switch 500 mA 200 V
Technical Document
Specifications
Brand
AssemtechContact Configuration
SPST-NO
Product Type
Reed Switch
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V
Contact Resistance
70mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.25ms
AT Value Range
46 to 70 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Width
2.54 mm
Standards/Approvals
ISO
Series
RI
Length
14.5mm
Country of Origin
Netherlands
Product details
Form A & C Reed Switch Kits
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
Features
Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically
Stock information temporarily unavailable.
BD 1.689
BD 1.689 1 Kit (Exc. Vat)
BD 1.858
BD 1.858 1 Kit (inc. VAT)
1
BD 1.689
BD 1.689 1 Kit (Exc. Vat)
BD 1.858
BD 1.858 1 Kit (inc. VAT)
Stock information temporarily unavailable.
1
| Quantity | Unit price |
|---|---|
| 1 - 9 | BD 1.689 |
| 10 - 24 | BD 1.514 |
| 25 - 49 | BD 1.390 |
| 50 - 199 | BD 1.215 |
| 200+ | BD 1.136 |
Technical Document
Specifications
Brand
AssemtechContact Configuration
SPST-NO
Product Type
Reed Switch
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V
Contact Resistance
70mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.25ms
AT Value Range
46 to 70 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Width
2.54 mm
Standards/Approvals
ISO
Series
RI
Length
14.5mm
Country of Origin
Netherlands
Product details
Form A & C Reed Switch Kits
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
Features
Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically