Technical Document
Specifications
Brand
BroadcomSensor Type
Light Intensity to Digital Signal
Array Size
1 x 1
Mounting Type
Surface Mount
Package Type
ChipLED
Pin Count
6
Dimensions
2 x 2 x 0.65mm
Height
0.65mm
Interface
Serial (2 Wire I²C)
Length
2mm
Maximum Operating Supply Voltage
3 V
Maximum Operating Temperature
+85 °C
Width
2mm
Minimum Operating Temperature
-30 °C
Minimum Operating Supply Voltage
2.4 V
Technology
Analogue, Digital
Country of Origin
Thailand
Product details
APDS-9309 Ambient Light Photo Sensor
The Avago Technologies digital APDS-9309 is an ambient light sensor with an I2C interface. The photo sensor converts light intensity to a digital signal output. The sensor operates two photodiodes, ADC and the ambient light levels are near to the human eye response. The light sensor is ideal in applications including a range of lighting conditions. They can be used for display backlight control, mobile and computer devices, signs and signal and lighting management.
Digital output: 16 Bit
I2C interface compatible with dedicated interrupt pin
I2C Fast-Mode at 400 kHz
Dual diode architecture to approximate the human eye response
50/60 Hz Lighting Ripple Rejection
Low 2.5 V Input Voltage and 1.8 V Digital Output
Low Active Power (0.6 mW Typical) with Power Down Mode
RoHS Compliant
Miniature Chip LED Package: Length 2 mm x Width 2 mm x Height 0.65 mm
Ambient Light Sensors, Avago Technologies
Stock information temporarily unavailable.
Please check again later.
P.O.A.
2500
P.O.A.
2500
Technical Document
Specifications
Brand
BroadcomSensor Type
Light Intensity to Digital Signal
Array Size
1 x 1
Mounting Type
Surface Mount
Package Type
ChipLED
Pin Count
6
Dimensions
2 x 2 x 0.65mm
Height
0.65mm
Interface
Serial (2 Wire I²C)
Length
2mm
Maximum Operating Supply Voltage
3 V
Maximum Operating Temperature
+85 °C
Width
2mm
Minimum Operating Temperature
-30 °C
Minimum Operating Supply Voltage
2.4 V
Technology
Analogue, Digital
Country of Origin
Thailand
Product details
APDS-9309 Ambient Light Photo Sensor
The Avago Technologies digital APDS-9309 is an ambient light sensor with an I2C interface. The photo sensor converts light intensity to a digital signal output. The sensor operates two photodiodes, ADC and the ambient light levels are near to the human eye response. The light sensor is ideal in applications including a range of lighting conditions. They can be used for display backlight control, mobile and computer devices, signs and signal and lighting management.
Digital output: 16 Bit
I2C interface compatible with dedicated interrupt pin
I2C Fast-Mode at 400 kHz
Dual diode architecture to approximate the human eye response
50/60 Hz Lighting Ripple Rejection
Low 2.5 V Input Voltage and 1.8 V Digital Output
Low Active Power (0.6 mW Typical) with Power Down Mode
RoHS Compliant
Miniature Chip LED Package: Length 2 mm x Width 2 mm x Height 0.65 mm