Technical Document
Specifications
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Country of Origin
Germany
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
Stock number 740-6657 is an Insertion and Extraction Tool
Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Stock information temporarily unavailable.
Please check again later.
BD 0.075
Each (On a Reel of 500) (Exc. Vat)
BD 0.083
Each (On a Reel of 500) (Including VAT)
500
BD 0.075
Each (On a Reel of 500) (Exc. Vat)
BD 0.083
Each (On a Reel of 500) (Including VAT)
500
Buy in bulk
quantity | Unit price | Per Reel |
---|---|---|
500 - 1000 | BD 0.075 | BD 37.500 |
1500 - 2500 | BD 0.070 | BD 35.000 |
3000 - 4500 | BD 0.065 | BD 32.500 |
5000+ | BD 0.065 | BD 32.500 |
Technical Document
Specifications
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Country of Origin
Germany
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
Stock number 740-6657 is an Insertion and Extraction Tool
Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807