Technical Documents
Specifications
Brand
MolexOperation Type
Hand
Product Type
Crimp Tool
Series
207129
Standards/Approvals
UL-486A, UL-310, Military Class 2, UL-486-C
Product Details
Produce consistent quality crimps with this hand crimping tool from Molex. Its handles stay closed until a full crimping cycle is achieved to help ensure you don't accidentally make a partial crimp. The tool features a user-friendly terminal locator and wire stop to accurately position a terminal and hold it securely in place during the crimping process. It's easy to convert the crimper from right-handed to left-handed operation by simply removing the locator and reversing the upper and lower parts of the tool.
The handles of this crimper automatically spring open when it has successfully completed a crimping cycle.
A crimping tool ensures your electrical connections are tight, which keeps electrical resistance as low as possible. It also helps to prevent the risk of short-circuits by preventing the cable from pulling out of the connector.
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage
From Molex a PremiumGrade manual crimping tool made from high-quality materials and designed to crimp to a high specification. This PremiumGrade crimp tool has been tested to a minimum of 50000 cycles. If the tool is looked after and maintained it produces crimps to the highest specification during this life span. This crimping tool consists of two ergonomically designed soft grip handles with an adjustable preload force, ratchet mechanism, die assembly and terminal locator.
The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved, preventing partial crimps. Once the cycle is complete the handles will spring open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened using an emergency ratchet release lever
Over time it may be necessary to adjust the pre-set handle load force. This is achieved by using a setting wheel which can be moved anti clockwise to increase the handle force or clockwise to decrease the handle force
This PremiumGrade hand crimping tool features a user-friendly terminal locator and wire stop which accurately position the terminal and holds it securely in place during the crimping process. The locator is pushed into place between the crimping dies and the terminal loaded into the correctly sized nest on the end of the locator. The locator button is released and the terminal is then positioned correctly for crimping. The pre-stripped wire is inserted through the terminal against the wire-stop and crimping can proceed
This PremiumGrade hand crimping tool can be converted from right handed to left handed operation by removing the locator and reversing the upper and lower parts of the tool
The dies and locator of this hand crimping tool can be used in a power crimp head (Molex Part Number 63816-0800). This crimp head is then connected to a battery powered crimping tool (Molex Part Numbers 63816-0200 and 63816-0250)
This PremiumGrade hand crimping tool is designed for use in low volume or field repair applications.
Stock information temporarily unavailable.
BD 264.805
BD 264.805 Each (Exc. Vat)
BD 291.285
BD 291.285 Each (inc. VAT)
1
BD 264.805
BD 264.805 Each (Exc. Vat)
BD 291.285
BD 291.285 Each (inc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
MolexOperation Type
Hand
Product Type
Crimp Tool
Series
207129
Standards/Approvals
UL-486A, UL-310, Military Class 2, UL-486-C
Product Details
Produce consistent quality crimps with this hand crimping tool from Molex. Its handles stay closed until a full crimping cycle is achieved to help ensure you don't accidentally make a partial crimp. The tool features a user-friendly terminal locator and wire stop to accurately position a terminal and hold it securely in place during the crimping process. It's easy to convert the crimper from right-handed to left-handed operation by simply removing the locator and reversing the upper and lower parts of the tool.
The handles of this crimper automatically spring open when it has successfully completed a crimping cycle.
A crimping tool ensures your electrical connections are tight, which keeps electrical resistance as low as possible. It also helps to prevent the risk of short-circuits by preventing the cable from pulling out of the connector.
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage
From Molex a PremiumGrade manual crimping tool made from high-quality materials and designed to crimp to a high specification. This PremiumGrade crimp tool has been tested to a minimum of 50000 cycles. If the tool is looked after and maintained it produces crimps to the highest specification during this life span. This crimping tool consists of two ergonomically designed soft grip handles with an adjustable preload force, ratchet mechanism, die assembly and terminal locator.
The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved, preventing partial crimps. Once the cycle is complete the handles will spring open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened using an emergency ratchet release lever
Over time it may be necessary to adjust the pre-set handle load force. This is achieved by using a setting wheel which can be moved anti clockwise to increase the handle force or clockwise to decrease the handle force
This PremiumGrade hand crimping tool features a user-friendly terminal locator and wire stop which accurately position the terminal and holds it securely in place during the crimping process. The locator is pushed into place between the crimping dies and the terminal loaded into the correctly sized nest on the end of the locator. The locator button is released and the terminal is then positioned correctly for crimping. The pre-stripped wire is inserted through the terminal against the wire-stop and crimping can proceed
This PremiumGrade hand crimping tool can be converted from right handed to left handed operation by removing the locator and reversing the upper and lower parts of the tool
The dies and locator of this hand crimping tool can be used in a power crimp head (Molex Part Number 63816-0800). This crimp head is then connected to a battery powered crimping tool (Molex Part Numbers 63816-0200 and 63816-0250)
This PremiumGrade hand crimping tool is designed for use in low volume or field repair applications.
