Rittal Plinth for use with Enclosure Type TS 8

RS Stock No.: 826-2896Brand: RittalManufacturers Part No.: 8601805
brand-logo
View all in Plinths

Technical Document

Specifications

Brand

Rittal

Type

Plinth

For Use With

Enclosure Type TS 8

Material

Steel

Country of Origin

United Kingdom

Product details

Rittal TS IT Plinths

Base/plinth front and rear

Base/plinth component consisting of one trim panel and two pre-configured corner pieces
Height: 100 mm
Grey (RAL 7035) sheet steel base/plinth and plastic cover caps
Supplied with: 2 x base/plinth components, 4 x cover caps, 4 x screws and captive nuts M12 for mounting on the enclosure

Base/plinth side trim panels

For mounting between the base/plinth components
At 200 mm height, two 100 mm base/plinth trim panels may be used
Base/plinth trim panels (100 mm high) may be installed rotated through 90° to stabilise bayed base/plinth components
Height: 100 mm
Sheet steel with grey (RAL 7035) finish
Supplied with: 2 x base/plinth trim panels and parts for attaching to the base/plinth components

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

BD 32.010

Each (Exc. Vat)

BD 35.211

Each (inc. VAT)

Rittal Plinth for use with Enclosure Type TS 8

1

Available in multiples of 1
1BD 32.010
2BD 64.020
3BD 96.030
4BD 128.040
5BD 160.050
6BD 192.060
7BD 224.070
8BD 256.080
9BD 288.090
10BD 320.100
11BD 352.110
12BD 384.120
13BD 416.130
14BD 448.140
15BD 480.150

BD 32.010

Each (Exc. Vat)

BD 35.211

Each (inc. VAT)

Rittal Plinth for use with Enclosure Type TS 8
Stock information temporarily unavailable.

1

Available in multiples of 1
1BD 32.010
2BD 64.020
3BD 96.030
4BD 128.040
5BD 160.050
6BD 192.060
7BD 224.070
8BD 256.080
9BD 288.090
10BD 320.100
11BD 352.110
12BD 384.120
13BD 416.130
14BD 448.140
15BD 480.150

Technical Document

Specifications

Brand

Rittal

Type

Plinth

For Use With

Enclosure Type TS 8

Material

Steel

Country of Origin

United Kingdom

Product details

Rittal TS IT Plinths

Base/plinth front and rear

Base/plinth component consisting of one trim panel and two pre-configured corner pieces
Height: 100 mm
Grey (RAL 7035) sheet steel base/plinth and plastic cover caps
Supplied with: 2 x base/plinth components, 4 x cover caps, 4 x screws and captive nuts M12 for mounting on the enclosure

Base/plinth side trim panels

For mounting between the base/plinth components
At 200 mm height, two 100 mm base/plinth trim panels may be used
Base/plinth trim panels (100 mm high) may be installed rotated through 90° to stabilise bayed base/plinth components
Height: 100 mm
Sheet steel with grey (RAL 7035) finish
Supplied with: 2 x base/plinth trim panels and parts for attaching to the base/plinth components