TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 2 mm Cable Diameter 0.9 mm Cable Diameter
Technical Document
Specifications
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
0.9mm
Maximum Cable Diameter
2mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Country of Origin
Mexico
Product details
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
Stock information temporarily unavailable.
BD 116.232
BD 116.232 1 Box of 500 (Exc. Vat)
BD 127.855
BD 127.855 1 Box of 500 (inc. VAT)
1
BD 116.232
BD 116.232 1 Box of 500 (Exc. Vat)
BD 127.855
BD 127.855 1 Box of 500 (inc. VAT)
Stock information temporarily unavailable.
1
Technical Document
Specifications
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
0.9mm
Maximum Cable Diameter
2mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Country of Origin
Mexico
Product details
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.