Technical Document
Specifications
Brand
DigilentProgrammable Logic Technology
FPGA
Kit Classification
Development Board
Kit Name
Arty Artix-7
Product details
Arty Artix-7 FPGA Development Board
Arty is a development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. Arty was designed specifically for use as a MicroBlaze Soft Processing System.
Xilinx Artix-7 FPGA (XC7A35T-1CSG324-1L)
33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops)
1800Kbit Fast Block RAM
5 x Clock Management Tiles, each with a phase-locked loop (PLL)
90 x DSP slices
Internal clock speeds exceeding 450MHz
On-chip Analogue-to-Digital Converter (XADC)
Programmable over JTAG and Quad-SPI Flash
Board Memory and Power
256MB DDR3L SDRAM with 16-bit bus @ 667MHz
16MB Quad-SPI Flash memory
USB-JTAG Programming circuit
Powered from USB connector or +7V to +15Vdc barrel jack socket
System Connectivity
10/100 Ethernet via RJ45 connector
USB-UART Bridge via microUSB socket
Switches and LEDs
4 x User Slide-Switches
4 x User Pushbuttons
Reset Pushbutton
Status LEDs: Power-on, FPGA programming status and USB/Ethernet port status
4 x User LEDs
4 x User RGB LEDs
Expansion Connectors
2 x Standard Pmod™ 2 x 6-pin connectors
2 x High-Speed Pmod™ 2 x 6-pin connectors
chipKIT/Arduino R3 Shield headers
Stock information temporarily unavailable.
Please check again later.
BD 84.975
Each (Exc. Vat)
BD 93.473
Each (Including VAT)
1
BD 84.975
Each (Exc. Vat)
BD 93.473
Each (Including VAT)
1
Technical Document
Specifications
Brand
DigilentProgrammable Logic Technology
FPGA
Kit Classification
Development Board
Kit Name
Arty Artix-7
Product details
Arty Artix-7 FPGA Development Board
Arty is a development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. Arty was designed specifically for use as a MicroBlaze Soft Processing System.
Xilinx Artix-7 FPGA (XC7A35T-1CSG324-1L)
33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops)
1800Kbit Fast Block RAM
5 x Clock Management Tiles, each with a phase-locked loop (PLL)
90 x DSP slices
Internal clock speeds exceeding 450MHz
On-chip Analogue-to-Digital Converter (XADC)
Programmable over JTAG and Quad-SPI Flash
Board Memory and Power
256MB DDR3L SDRAM with 16-bit bus @ 667MHz
16MB Quad-SPI Flash memory
USB-JTAG Programming circuit
Powered from USB connector or +7V to +15Vdc barrel jack socket
System Connectivity
10/100 Ethernet via RJ45 connector
USB-UART Bridge via microUSB socket
Switches and LEDs
4 x User Slide-Switches
4 x User Pushbuttons
Reset Pushbutton
Status LEDs: Power-on, FPGA programming status and USB/Ethernet port status
4 x User LEDs
4 x User RGB LEDs
Expansion Connectors
2 x Standard Pmod™ 2 x 6-pin connectors
2 x High-Speed Pmod™ 2 x 6-pin connectors
chipKIT/Arduino R3 Shield headers