Phoenix Contact3211933 PT 4-MT Series Disconnect Terminal Block, Single-Level, Push In Termination
Technical Document
Specifications
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Series
PT 4-MT
American Wire Gauge
24 → 10AWG
Termination Method
Push In
Voltage Rating
400 V
Current Rating
20A
Pitch
6.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA, cULus, EAC, REACH
Model Number
PT 4-MT
Country of Origin
Poland
Product details
PT 4-MT Knife Disconnect Terminal Blocks
Knife disconnect terminal block with a current carrying capacity of 20 A
Compact design
Seamless and can be double bridged for all tasks in time saving potential supply and distribution
Testing option on both sides of the disconnect point, left in the bridge shaft, right in the 1mm Ø test hole near the actuation lever
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Stock information temporarily unavailable.
Please check again later.
BD 1.645
Each (In a Pack of 5) (Exc. Vat)
BD 1.809
Each (In a Pack of 5) (inc. VAT)
5
BD 1.645
Each (In a Pack of 5) (Exc. Vat)
BD 1.809
Each (In a Pack of 5) (inc. VAT)
5
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 5 - 25 | BD 1.645 | BD 8.225 |
| 30 - 55 | BD 1.580 | BD 7.900 |
| 60+ | BD 1.540 | BD 7.700 |
Technical Document
Specifications
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Series
PT 4-MT
American Wire Gauge
24 → 10AWG
Termination Method
Push In
Voltage Rating
400 V
Current Rating
20A
Pitch
6.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA, cULus, EAC, REACH
Model Number
PT 4-MT
Country of Origin
Poland
Product details
PT 4-MT Knife Disconnect Terminal Blocks
Knife disconnect terminal block with a current carrying capacity of 20 A
Compact design
Seamless and can be double bridged for all tasks in time saving potential supply and distribution
Testing option on both sides of the disconnect point, left in the bridge shaft, right in the 1mm Ø test hole near the actuation lever
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.