Takachi Electric Industrial AWN Black Aluminium Heat Sink Case, 200 x 65.8 x 65.8mm
Technical Document
Specifications
Body Material
Aluminium
External Length
200 mm
External Width
65.8 mm
External Height
65.8 mm
External Dimensions
200 x 65.8 x 65.8mm
Colour
Black
IP Rating
IP67
Series
AWN
Ventilated
No
Carrying Handle
No
Country of Origin
Japan
Product details
Takachi AWN Heatsink Aluminium Enclosure
The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples include LED outdoor power supply case, enclosed switch, controller or industrial camera housing.
Heavy duty enclosure
Silver or black anodized extruded aluminium body with heat-sink
Flanged metallic grey or black powder coated side plates for easy wall mounting
PCB or chassis are horizontally mountable by sliding into grooved inner body frame
Integral card guides accept 1.6mm PCB
IP67 rated
Operating temperature -40 to +105°C
Maximum torque 1.0N/m (10kgf/cm)
Supplied with
2 x side plates, 1 x body frame, 2 x silicone gaskets, 8 x stainless steel screws and 4 x rubber feet.
Stock information temporarily unavailable.
Please check again later.
BD 34.155
BD 34.155 Each (Exc. Vat)
BD 37.571
BD 37.571 Each (inc. VAT)
1
BD 34.155
BD 34.155 Each (Exc. Vat)
BD 37.571
BD 37.571 Each (inc. VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 5 | BD 34.155 |
| 6 - 9 | BD 33.120 |
| 10+ | BD 32.880 |
Technical Document
Specifications
Body Material
Aluminium
External Length
200 mm
External Width
65.8 mm
External Height
65.8 mm
External Dimensions
200 x 65.8 x 65.8mm
Colour
Black
IP Rating
IP67
Series
AWN
Ventilated
No
Carrying Handle
No
Country of Origin
Japan
Product details
Takachi AWN Heatsink Aluminium Enclosure
The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples include LED outdoor power supply case, enclosed switch, controller or industrial camera housing.
Heavy duty enclosure
Silver or black anodized extruded aluminium body with heat-sink
Flanged metallic grey or black powder coated side plates for easy wall mounting
PCB or chassis are horizontally mountable by sliding into grooved inner body frame
Integral card guides accept 1.6mm PCB
IP67 rated
Operating temperature -40 to +105°C
Maximum torque 1.0N/m (10kgf/cm)
Supplied with
2 x side plates, 1 x body frame, 2 x silicone gaskets, 8 x stainless steel screws and 4 x rubber feet.